Goods Lift

Goods Elevators

Product Details:
  • Capacity: 3-4 ton
  • Warranty: 12 Months
  • Material: Stainless Steel
  • Number of Floors: 1-4
  • Operating Height: 10 feet
  • Usage/Application: Industrial
  • Brand: S Crane

We are offering Goods Elevators that help in transferring of loads from one level to another. Extensively used in factories and storage facilities for the movement of goods between floors, these elevators are known for their high speed and smooth operations. Designed as per the set industry standards, these goods elevators are dimensionally accurate and extremely efficient.
We are offering two types of goods Elevator, such as
(i) Drum wound machine based with hoistPRODUCT SPECIFICATION
  • These lifts are available in various capacities ranging from 250 kg to 10 Tons
  • Goods and workers can be transported to any number of floors
  • The size of the lifts range from 3' x 2' to as large as 12' x 20'
  • Standard height of the cabin is 6' 7½"
  • The lift can open on the opposite side also (2 side open cabin)

(ii) Drum wound type with traction machine
PRODUCT SPECIFICATION
  • The movement of the lift is based on the winding and unwinding of a wire rope on a rotating drum.
  • A unique feature of our drum design is the provision of two ropes winding separately on a right hand thread groove and a left hand thread groove.
  • This leads to lesser rope stress and longer life. These lifts are quicker to install and require lesser space.
  • Traction type with counterweight
  • This is achieved first through the use of 3 or more independent wire ropes stretched across the main traction sheave.
  • There being no positive coupling between the lift and the machine leads to greater safety as a slip is permitted whenever there is an obstruction to the lift travel.
  • No overload on the motor in case of lift overshooting at the top floor.
  • Jerk free, smooth travel is possible by the usage of 2:1 roping. Though smoother, traction lifts travel at higher speeds than drum wound lifts using the same power.

ADVANTAGES
  • Greater safety
  • Jerk free, smooth travel
  • Easy to operate

REQUIREMENTS AT CLIENTS END
  • Clear height of doors is 2000 mm
  • Door Lintel Bottom should be at 2150 from FFL
  • Doors are available in various designs like manual swing doors and telescopic doors
  • All Sizes are inside finished dimensions in mm.
  • All Hoist way walls are 230 mm thick Brick or 150 mm RCC walls
  • At ground floor two side open doors are possible
CLIENTS’ SCOPE
  • Entire civil structure for the lift shaft including plaster & painting of lift shaft inside
  • Three phase electric supply
  • Scaffolding during lift erection
  • Provision of sill support, machine support, lifting beam / hook, pit ladder, etc
  • Grouting of our hold fasts, push button boxes, door frame members, etc.
  • Machine room will be extended beyond the lift shaft so that machine is approachable from three sides for maintenance

Goods Lift Elevators

Product Details:
  • Floor: Ground + 10
  • Lift: 0.5 meter to 20 meter
  • Capacity: 0.5 Tons Onwards
  • Operating Height: 10 feet
  • Span: 3 meter X 3 meter X 3 meter
  • Brand: S Cranes

Our organization is offering Goods Lifts that are manufactured under the strict supervision of our qualified professionals and thus, appreciated for their sturdy and rugged construction. These lifts can accommodate weight up to 5000 kg and are available in different sizes & capacity to meet the diverse of our clients. Further, these goods lifts are available in two types like freight elevators & service elevators with varied types of doors such as ordinary collapsible gates, imperforated doors, vertical bi parting gates and sliding gates.


Rope Hoist, mounted on a supported I-Beam, which lowers & raises the cage. ln the absence of a RCC well inside the building, a fabricated enclosure supporting structure can be erected on site. This structure is independent of the building can be erected inside or outside the building, just touching. Guide wheels are fitted on the cage which run in the C-Guides which are provided on the structure on opposite sides. This arrangement enables smooth & trouble free travel of the cage in a vertically straight line. Collapsible gates are provided at all entry! exit points for essential safety.

SPECIAL FEATURES
  • LIMIT SWITCHES To prevent over hoisting & over lowering of hook.
  • ELECTRO-MECHANIC DOOR LOCKS near the collapsible gates to ensure
  • Lift does not work electrically if any door is open.
  • The collapsible gate does not open mechanically unless cage is on corresponding level.
  • SPRING BUFFERS on the floor of the lift well to cushion the cage.

Freight Elevators

Product Details:
  • Capacity: 3-4 ton
  • Warranty: 12 Months
  • Material: Stainless Steel
  • Door Style: Automatic
  • Operating Height: 10 feet
  • Usage/Application: Industrial
  • Drive Type: DC

We are offering Freight Elevators that are widely used in moving bulk goods in the areas like factories, shops, showroom, factory, warehouse, department store or shipping center. These are specifically designed by our experienced designers to offer smooth riding experience and consuming less power. Our Freight Elevator also prohibit from carrying any passengers other than those required to handle the freight.

With our vast industry experience, we offer our clients an exclusive range of goods lift. These goods lifts are extensively used in factories and storage facilities for the movement of goods between floors.

Two kinds of goods lifts that we offer:
(i) Drum wound machine based with hoist
PRODUCT SPECIFICATION
  • These lifts are available in various capacities ranging from 250 Kgs to 10 Tons.
  • Goods and workers can be transported to any number of floors.
  • The size of the lifts range from 3' x 2' to as large as 12' x 20'
  • Standard height of the cabin is 6' 7½".
  • The lift can open on the opposite side also (2 side open cabin).

(ii) Drum wound type with traction machine:
PRODUCT SPECIFICATION
  • The movement of the lift is based on the winding and unwinding of a wire rope on a rotating drum.
  • A unique feature of our drum design is the provision of two ropes winding separately on a right hand thread groove and a left hand thread groove.
  • This leads to lesser rope stress and longer life. These lifts are quicker to install and require lesser space.
  • Traction type with counterweight
  • This is achieved first through the use of 3 or more independent wire ropes stretched across the main traction sheave.
  • There being no positive coupling between the lift and the machine leads to greater safety as a slip is permitted whenever there is an obstruction to the lift travel.
  • No overload on the motor in case of lift overshooting at the top floor.
  • Jerk free, smooth travel is possible by the usage of 2:1 roping. Though smoother, traction lifts travel at higher speeds than drum wound lifts using the same power.

ADVANTAGES
  • Greater safety
  • Jerk free, smooth travel
  • Easy to operate

REQUIREMENTS AT CLIENTS END
  • Clear height of doors is 2000mm
  • Door Lintel Bottom should be at 2150 from FFL
  • Doors are available in various designs like manual swing doors and telescopic doors
  • All Sizes are inside finished dimensions in mm.
  • All Hoist way walls are 230 mm thick Brick or 150 mm RCC walls
  • At ground floor two side open doors are possible

CLIENTS SCOPE
  • Entire civil structure for the lift shaft including plaster & painting of lift shaft inside
  • Three phase electric supply
  • Scaffolding during lift erection
  • Provision of sill support, machine support, lifting beam / hook, pit ladder, etc
  • Grouting of our hold fasts, push button boxes, door frame members, etc.
  • Machine room will be extended beyond the lift shaft so that machine is approachable from three sides for maintenance
Looking for Goods Lift ?
Share Us:
© S Crane Engineering Works
Desktop Site Back to top