With our vast industry experience, we offer our clients an exclusive range of Industrial Elevators. These industrial lifts are extensively used in factories and storage facilities for the movement of goods between floors.
Jerk free, smooth travel
Easy to operate
REQUIREMENTS AT CLIENTS END
Clear height of doors is 2000mm
Door Lintel Bottom should be at 2150 from FFL
Doors are available in various designs like manual swing doors and telescopic doors
All Sizes are inside finished dimensions in mm.
All Hoist way walls are 230 mm thick Brick or 150 mm RCC walls
At ground floor two side open doors are possible
Entire civil structure for the lift shaft including plaster & painting of lift shaft inside
Rope Hoist, mounted on a supported I-Beam, which lowers & raises the cage. ln the absence of a RCC well inside the building, a fabricated enclosure supporting structure can be erected on site. This structure is independent of the building can be erected inside or outside the building, just touching. Guide wheels are fitted on the cage which run in the C-Guides which are provided on the structure on opposite sides. This arrangement enables smooth & trouble free travel of the cage in a vertically straight line. Collapsible gates are provided at all entry! exit points for essential safety.
Capacity: 0.5 Tons Onwards
Span: 3 meter X 3 meter X 3 meter
Lift: 0.5 meter to 20 meter
Floor : Ground + 10
LIMIT SWITCHES To prevent over hoisting & over lowering of hook.
ELECTRO-MECHANIC DOOR LOCKS near the collapsible gates to ensure
Lift does not work electrically if any door is open.
The collapsible gate does not open mechanically unless cage is on corresponding level.
SPRING BUFFERS on the floor of the lift well to cushion the cage.