With our vast industry experience, we offer our clients an exclusive range of goods lift. These goods lifts are extensively used in factories and storage facilities for the movement of goods between floors. Two kinds of goods lifts that we offer (i) Drum wound machine based with hoist Product Specification
These lifts are available in various capacities ranging from 250 Kgs to 10 Tons.
Goods and workers can be transported to any number of floors.
The size of the lifts range from 3' x 2' to as large as 12' x 20'
Standard height of the cabin is 6' 7½".
The lift can open on the opposite side also (2 side open cabin).
(ii)Drum wound type with traction machine Product specification
The movement of the lift is based on the winding and unwinding of a wire rope on a rotating drum.
A unique feature of our drum design is the provision of two ropes winding separately on a right hand thread groove and a left hand thread groove.
This leads to lesser rope stress and longer life. These lifts are quicker to install and require lesser space.
Traction type with counterweight
This is achieved first through the use of 3 or more independent wire ropes stretched across the main traction sheave.
There being no positive coupling between the lift and the machine leads to greater safety as a slip is permitted whenever there is an obstruction to the lift travel.
No overload on the motor in case of lift overshooting at the top floor.
Jerk free, smooth travel is possible by the usage of 2:1 roping. Though smoother, traction lifts travel at higher speeds than drum wound lifts using the same power.
ADVANTAGES
Greater safety
Jerk free, smooth travel
Easy to operate
REQUIREMENTS AT CLIENTS END
Clear height of doors is 2000mm
Door Lintel Bottom should be at 2150 from FFL
Doors are available in various designs like manual swing doors and telescopic doors
All Sizes are inside finished dimensions in mm.
All Hoist way walls are 230 mm thick Brick or 150 mm RCC walls
At ground floor two side open doors are possible
CLIENTS SCOPE
Entire civil structure for the lift shaft including plaster & painting of lift shaft inside.
Rope hoist, mounted on a supported i-beam, which lowers & raises the cage. In the absence of a RCC well inside the building, a fabricated enclosure supporting structure can be erected on site. This structure is independent of the building can be erected inside or outside the building, just touching. Guide wheels are fitted on the cage which run in the C-guides which are provided on the structure on opposite sides. This arrangement enables smooth & trouble free travel of the cage in a vertically straight line. Collapsible gates are provided at all entry exit points for essential safety.
Range
Capacity : 0.5 tons to 5 tons
Span : 3 m X 3 m X 3 m
Lift : 0.5 m to 20 m
Floor : Ground + 10
Features:
Limit switches to prevent over hoisting & over lowering of hook.
Electro-mechanic door locks near the collapsible gates to ensure : 1) Lift does not work electrically if any door is open. 2) The collapsible gate does not open mechanically unless cage is on corresponding level.